The Impact of Environmental Benzene, Toluene, Ethylbenzene, and Xylene Exposure on Blood-Based DNA Methylation Profiles in Pregnant African American Women from Detroit.

African American women in the United States have a high risk of adverse pregnancy outcomes. DNA methylation is a potential mechanism by which exposure to BTEX (benzene, toluene, ethylbenzene, and xylenes) may cause adverse pregnancy outcomes. Data are from the Maternal Stress Study, which recruited African American women in the second trimester of pregnancy from February 2009 to June 2010. DNA methylation was measured in archived DNA from venous blood collected in the second trimester. Trimester-specific exposure to airshed BTEX was estimated using maternal self-reported addresses and geospatial models of ambient air pollution developed as part of the Geospatial Determinants of Health Outcomes Consortium. Among the 64 women with exposure and outcome data available, 46 differentially methylated regions (DMRs) were associated with BTEX exposure (FDR adjusted p-value < 0.05) using a DMR-based epigenome-wide association study approach. Overall, 89% of DMRs consistently exhibited hypomethylation with increasing BTEX exposure. Biological pathway analysis identified 11 enriched pathways, with the top 3 involving gamma-aminobutyric acid receptor signaling, oxytocin in brain signaling, and the gustation pathway. These findings highlight the potential impact of BTEX on DNA methylation in pregnant women.

Co-exposure of petrochemical workers to noise and mixture of benzene, toluene, ethylbenzene, xylene, and styrene: Impact on mild renal impairment and interaction.

Epidemiological evidence concerning effects of simultaneous exposure to noise and benzene, toluene, ethylbenzene, xylene, and styrene (BTEXS) on renal function remains uncertain. In 2020, a cross-sectional study was conducted among 1160 petrochemical workers in southern China to investigate effects of their co-exposure on estimated glomerular filtration rate (eGFR) and mild renal impairment (MRI). Noise levels were assessed using cumulative noise exposure (CNE). Urinary biomarkers for BTEXS were quantified. We found the majority of workers had exposure levels to noise and BTEXS below China's occupational exposure limits. CNE, trans, trans-muconic acid (tt-MA), and the sum of mandelic acid and phenylglyoxylic acid (PGMA) were linearly associated with decreased eGFR and increased MRI risk. We observed U-shaped associations for both N-acetyl-S-phenyl-L-cysteine (SPMA) and o-methylhippuric acid (2-MHA) with MRI. In further assessing the joint effect of BTEXS (ß, -0.164 [95% CI, -0.296 to -0.033]) per quartile increase in all BTEXS metabolites on eGFR using quantile g-computation models, we found SPMA, tt-MA, 2-MHA, and PGMA played pivotal roles. Additionally, the risk of MRI associated with tt-MA was more pronounced in workers with lower CNE levels (P = 0.004). Multiplicative interaction analysis revealed antagonisms of CNE and PGMA on MRI risk (P = 0.034). Thus, our findings reveal negative dose-effect associations between noise and BTEXS mixture exposure and renal function in petrochemical workers. With the exception of toluene, benzene, xylene, ethylbenzene, and styrene are all concerning pollutants for renal dysfunction. Effects of benzene, ethylbenzene, and styrene exposure on renal dysfunction were more pronounced in workers with lower CNE.

Natural attenuation of BTEX and chlorobenzenes in a formerly contaminated pesticide site in China: Examining kinetics, mechanisms, and isotopes analysis.

Groundwater contamination from abandoned pesticide sites is a prevalent issue in China. To address this problem, natural attenuation (NA) of pollutants has been increasingly employed as a management strategy for abandoned pesticide sites. However, limited studies have focused on the long-term NA process of co-existing organic pollutants in abandoned pesticide sites by an integrated approach. In this study, the NA of benzene, toluene, ethylbenzene, and xylene (BTEX), and chlorobenzenes (CBs) in groundwater of a retired industry in China was systematically investigated during the monitoring period from June 2016 to December 2021. The findings revealed that concentrations of BTEX and CBs were effectively reduced, and their NA followed first-order kinetics with different rate constants. The sulfate-reducing bacteria, nitrate-reducing bacteria, fermenting bacteria, aromatic hydrocarbon metabolizing bacteria, and reductive dechlorinating bacteria were detected in groundwater. It was observed that distinct environmental parameters played a role in shaping both overall and key bacterial communities. ORP (14.72%) and BTEX (12.89%) were the main drivers for variations of the whole and key functional microbial community, respectively. Moreover, BTEX accelerated reductive dechlorination. Furthermore, BTEX and CBs exhibited significant enrichment of 13C, ranging from +2.9 to +27.3‰, demonstrating their significance in situ biodegradation. This study provides a scientific basis for site management.

Exposure to BTEX is associated with cardiovascular disease, dyslipidemia and leukocytosis in national US population.

BACKGROUND: Comprehensive research on the effects of individual benzene, toluene, ethylbenzene, and xylenes (BTEX) and their mixture measured in blood samples, on cardiovascular diseases (CVD) and related risk factors among the general population is limited. OBJECTIVES: To investigate the effects of blood individual and mixed BTEX on total CVD and its subtypes, lipid profiles, and white blood cell (WBC) count. METHODS: Survey-weighted multivariate logistic regression was used to examine the associations between blood individual and mixed BTEX with CVD and its subtypes in 17,007 participants from NHANES 1999-2018. The combined effect of BTEX mixture on CVD was estimated using weighted quantile sum modeling and quantile g-computation. Weighted multivariate linear regression assessed the effects of BTEX on lipid profiles and WBC, including its five-part differential count. RESULTS: In comparison to the reference quartile of BTEX mixture, individuals in the highest quartile had a significantly increased adjusted odds ratio of CVD risk (1.64, 95 % CI: 1.23 to 2.19, P for trend = 0.008). Positive associations were observed for benzene, toluene, ethylbenzene, and m-/p-xylene, demonstrating a monotonically increasing exposure-response relationship. Mixed BTEX was associated with congestive heart failure (CHF), angina pectoris, and heart attack. Individual benzene, toluene, and ethylbenzene were associated with CHF, while toluene, ethylbenzene, and all xylene isomers were linked to angina pectoris. Benzene, toluene, and o-xylene were associated with heart attack. Both mixed and individual BTEX showed positive associations with triglycerides, cholesterol, low-density lipoprotein, and WBC, including its five-part differential count, but a negative relationship with high-density lipoprotein. Subgroup analyses identified modifying effects of smoking, drinking, exercise, BMI, hypertension, and diabetes on the associations between specific toxicants and CVD risk. CONCLUSIONS: Exposure to BTEX was associated with cardiovascular diseases and cardiovascular risk factors. These findings emphasize the importance of considering blood BTEX levels when assessing cardiovascular health risks.

Ambient air pollutants and breast cancer stage in Tehran, Iran.

This study aimed to examine the impacts of single and multiple air pollutants (AP) on the severity of breast cancer (BC). Data of 1148 diagnosed BC cases (2008-2016) were obtained from the Cancer Research Center and private oncologist offices in Tehran, Iran. Ambient PM10, SO2, NO, NO2, NOX, benzene, toluene, ethylbenzene, m-xylene, p-xylene, o-xylene, and BTEX data were obtained from previously developed land use regression models. Associations between pollutants and stage of BC were assessed by multinomial logistic regression models. An increase of 10 µg/m3 in ethylbenzene, o-xylene, m-xylene, and 10 ppb of NO corresponded to 10.41 (95% CI 1.32-82.41), 4.07 (1.46-11.33), 2.89 (1.08-7.73) and 1.08 (1.00-1.15) increase in the odds of stage I versus non-invasive BC, respectively. Benzene (OR, odds ratio = 1.16, 95% CI 1.01-1.33) and o-xylene (OR = 1.18, 1.02-1.38) were associated with increased odds of incidence of BC stages III & IV versus non-invasive stages. BC stage I and stage III&IV in women living in low SES areas was associated with significantly higher levels of benzene, ethylbenzene, o-xylene, and m-xylene. The highest multiple-air-pollutants quartile was associated with a higher odds of stage I BC (OR = 3.16) in patients under 50 years old. This study provides evidence that exposure to AP is associated with increased BC stage at diagnosis, especially under premenopause age.

Health risk assessment of exposure to benzene, toluene, ethyl benzene, and xylene in shoe industry-related workplaces.

Benzene, toluene, ethyl benzene, and xylene (BTEX) are prevalent pollutants in shoe industry-related workplaces. The aim of this study was to assess exposure to BTEX and their carcinogenic and non-carcinogenic risks in shoe-industry-related workplaces. This study was carried out at different shoe manufactures, small shoe workshop units, shoe markets, and shoe stores in Tabriz, Iran in 2021. Personal inhalation exposure to BTEX was measured using the National Institute for Occupational Safety and Health (NIOSH) 1501 method. Carcinogenic and non-carcinogenic risks due to inhalation exposure to BTEX were estimated by United States Environmental Protection Agency (U.S. EPA) method based on Mont Carlo simulation. Results showed that the concentrations of benzene and toluene were higher than the threshold limit value (TLV) in both gluing and non-gluing units of shoe manufactures. The total carcinogenic risk (TCR) due to exposure to benzene and ethyl benzene was considerable in all shoe industry-related workplaces. Also, the hazard index (HI) as a non-carcinogenic index was higher than standard levels in all shoe industry-related workplaces. Therefore, shoe industry-related workers are at cancer and non-cancer risks due to exposure to BTEX. Prevention measures need to be implemented to reduce the concentration of BTEX in shoe industry-related workplaces.

BTEX in indoor air of barbershops and beauty salons: Characterization, source apportionment and health risk assessment.

BACKGROUND: Volatile organic compounds, mainly BTEX, are among the pollutants of concern in beauty salons and barbershops that threaten both staff personnel and clients' health. This study aimed to determine the concentration of BTEX in barbershops and beauty salons and assess the carcinogenic and non-carcinogenic risks based on the actual risk coefficients. Also, possible sources of BTEX were determined. METHOD: Samples were collected by passive sampling. Quantitative and qualitative measurements of BTEX compounds were performed using gas chromatography-mass spectrometry (GC-MASS). Subsequently, the health risks were assessed according to the US Environmental Protection Agency. SPSS24 software and positive matrix factorization (PMF) analysis were used for statistical analysis and source apportionment respectively. RESULTS: Toluene is the most abundant compound in beauty salons, with a maximum concentration of 219.4 (µg/m3) in beauty salons. Results indicated that the mean ELCR value estimated for benzene regarding female staff exposure (1.04 × 10-5) was higher than that for men (4.05 × 10-6). Also, ELCR values of ethylbenzene for staff exposure were 2.08 × 10-6 and 3.8 × 10-6 for men and women, respectively, and possess possible carcinogenesis risks. CONCLUSION: Use of solvents and cosmetic products, improper heating systems, and type of service are the sources that probably contribute to BTEX emissions in beauty salons. It is necessary to follow health guidelines and conduct continuous monitoring for their implementation, in addition to setting a mandated occupational regulation framework or air quality requirements, to improve the health conditions in beauty salons.

BTEX in Ambient Air of Zarand, the Industrial City in Southeast of Iran: Concentration, Spatio-temporal Variation and Health Risk Assessment.

The existence of several industries in Zarand, a city in Southeastern Iran, caused challenges for the residents about air pollutants and associated health effects. In the present study, the concentration of benzene, toluene, ethylbenzene, and xylene (BTEX), spatio-temporal distribution and related health risks were evaluated. Passive samplers were used to collect 30 samples in the over the hot and cold periods in 2020. The ordinary Kriging method was used to predict the spatio-temporal distribution of BTEXs. Also, the Monte Carlo simulation was used to evaluate the related carcinogenic and non-carcinogenic risks of BTEX for adults. The ranking of mean concentration of overall toluene, xylene, ethylbenzene, and benzene followed as 82.49 ± 26.86, 30.91 ± 14.04, 4.75 ± 3.28, and 0.91 ± 0.18 µg/m3, respectively. The mean value of lifetime carcinogenic risk (LTCR) for residents related to benzene was 7.52 × 10- 6, indicating a negligible carcinogenic risk for them. Furthermore, the ranking of non-carcinogenic risk calculated through hazard quotient (HQ) for investigated BTEX compounds followed as xylene > benzene > toluene > ethylbenzene over the hot period and xylene > toluene > ethylbenzene over the cold period which all points had HQ < 1. Additionally, according to the findings of the sensitivity analysis, the concentration of benzene was the main contributor in increasing the carcinogenic risk. According to our results, it can be stated that the existence of several industries in the study area could not possibly occur the significant carcinogenic and non-carcinogenic risks to the adults residents in the study period. Human studies are recommended to determine definite results.

Association between ambient BTEX mixture and neurological hospitalizations: A multicity time-series study in Taiwan.

BACKGROUND: Benzene, toluene, ethylbenzene, and xylenes, collectively known as BTEX, are hazardous chemical mixtures, and their neurological health effects have not been thoroughly evaluated. We examined the association between BTEX exposure and neurological hospital admissions. METHODS: This was a multicity time-series study conducted in five major Taiwanese cities. Daily hospital admission records for diseases of the nervous system from January 1, 2016, to December 31, 2017, were collected from the National Health Insurance Research Database. Ambient BTEX and criteria pollutant concentrations and weather factors were collected from Photochemical Assessment Monitoring Stations. We applied a Poisson generalized additive model (GAM) and weighted quantile sum regression to calculate city-specific effect estimates for BTEX and conducted a random-effects meta-analysis to pool estimates. RESULTS: We recorded 68 neurological hospitalizations per day during the study period. The daily mean BTEX mixture concentrations were 22.5 µg/m3, ranging from 18.3 µg/m3 in Kaohsiung to 27.0 µg/m3 in Taichung, and toluene (13.6 µg/m3) and xylene (5.8 µg/m3) were the dominant chemicals. Neurological hospitalizations increased by an average of 1.6 % (95 % CI: 0.6-2.6 %) for every interquartile range (15.8 µg/m3) increase in BTEX at lag 0 estimated using a GAM model. A quartile increase in the weighted sum of BTEX exposure was associated with a 1.7 % (95 % CI: 0.6-2.8 %) increase in daily neurological hospitalizations. CONCLUSION: We found consistent acute adverse effects of BTEX on neurological hospitalizations in Taiwan, with toluene and xylene as the dominant chemicals. These findings aid the development of more targeted public health interventions.

Assessment of health risk and burden of disease induced by exposure to benzene, toluene, ethylbenzene, and xylene in the outdoor air in Tehran, Iran.

The health risk and burden of disease induced by exposure to benzene, toluene, ethylbenzene, and xylene (BTEX) in the outdoor air in Tehran, 2019 were assessed based on the data of five fixed stations with weekly BTEX measurements. The non-carcinogenic risk, carcinogenic risk, and disease burden from exposure to BTEX compounds were determined by hazard index (HI), incremental lifetime cancer risk (ILCR), and disability-adjusted life year (DALY), respectively. The average annual concentrations of benzene, toluene, ethylbenzene, and xylene in the outdoor air in Tehran were 6.59, 21.62, 4.68, and 20.88 µg/m3, respectively. The lowest seasonal BTEX concentrations were observed in spring and the highest ones occurred in summer. The HI values of BTEX in the outdoor air in Tehran by district ranged from 0.34 to 0.58 (less than one). The average ILCR values of benzene and ethylbenzene were 5.37 × 10-5 and 1.23 × 10-5, respectively (in the range of probable increased cancer risk). The DALYs, death, DALY rate (per 100,000 people) and death rate (per 100,000 people) induced by BTEX exposure in the outdoor air in Tehran were determined to be 180.21, 3.51, 2.07, and 0.04, respectively. The five highest attributable DALY rates in Tehran by district were observed in the districts 10 (2.60), 11 (2.43), 17 (2.41), 20 (2.32), and 9 (2.32), respectively. The corrective measures such as controlling road traffic and improving the quality of vehicles and gasoline in Tehran could reduce the burden of disease from BTEX along with the health effects of other outdoor air pollutants.

Identify Primary Air Pollution Sources of BTEX by Using Positive Matrix Factorization (PMF): A Case Study of Ho Chi Minh City, Vietnam.

Ho Chi Minh City (HCMC) is one of the main socioeconomic and financial centers of Vietnam. The city also faces serious air pollution. However, the city polluted with benzene, toluene, ethylbenzene, and xylene (BTEX) has rarely been studied. We used positive matrix factorization (PMF) to analyze BTEX concentrations measured at two sampling locations to identify the main sources of BTEX in HCMC. The locations represented residential area (i.e., To Hien Thanh) and industrial area (i.e., Tan Binh Industrial Park). At the To Hien Thanh location, the average concentrations of benzene, ethylbenzene, toluene, and xylene were 6.9, 14.4, 4.9, and 12.7 µg/m3, respectively. At the Tan Binh location, the average concentrations of benzene, ethylbenzene, toluene, and xylene were 9.8, 22.6, 2.4, and 9.2 µg/m3, respectively. The results showed that PMF was a reliable model for source apportionment in HCMC. Traffic activities were the main sources of BTEX. Besides, industrial activities also contributed to BTEX emissions, especially the location near the industrial park. The majority of BTEXs at the To Hien Thanh sampling site come from traffic sources accounting for 56.2%. Activities from traffic and photochemical reactions (42.7%) and industrial sources (40.5%) were the main sources affecting BTEX emissions at the sampling site of Tan Binh Industrial Park. This study can be used as a reference for mitigation solutions to reduce the BTEX emission in HCMC.

Occurrence of and dermal exposure to benzene, toluene and styrene in sunscreen products marketed in the United States.

Occurrence of volatile organic compounds (VOCs) such as benzene in personal care products is a topic of public health concern. Sunscreen products are extensively used to protect skin and hair from UV radiation from sun light. Nevertheless, little is known about exposure doses and risks of VOCs present in sunscreens. In this study, we determined the concentrations of and exposure to three VOCs, namely benzene, toluene and styrene, in 50 sunscreen products marketed in the United States. Benzene, toluene and styrene were found in 80 %, 92 % and 58 %, respectively, of the samples analyzed at mean concentrations of 45.8 ng/g (range: 0.007-862), 89.0 ng/g (range: 0.006-470) and 161 ng/g (range: 0.006-1650), respectively. The mean dermal exposure doses (DEDs) to benzene, toluene and styrene of children/teenagers were 68.3, 133 and 441 ng/kg-bw/d, respectively, whereas those of adults were 48.7, 94.6 and 171 ng/kg-bw/d, respectively. The lifetime cancer risk from benzene concentrations present in 22 sunscreen products (44 % of the samples) for children/teenagers and 19 sunscreen products (38 %) for adults, exceeded the acceptable benchmark risk level (1.0 × 10-6). This is the first study to comprehensively assess the concentrations of and risks to benzene, toluene and styrene present in sunscreen products.

BTEX and PAH contributions to Lake Kinneret water: a seasonal-based study of volatile and semi-volatile anthropogenic pollutants in freshwater sources.

Benzene , toluene, ethylbenzene, and xylenes (BTEX) BTEX molecules are toxic components, ubiquitous in the environment, often found in concentrations- a few orders of magnitude higher than the well-studied PAHs levels. This fact is demonstrated in either crude oil, fuels, water, and air samples. BTEX studies focus mainly on the airborne levels of these molecules, while their waterborne presence is understudied. In this study, BTEX levels were assessed at Lake Kinneret, Israel. As a result, 0-1.5 ppb of BTEX was recorded in five stations (2021-2022). Elevated BTEX levels (3-10 ppb) were recorded at the northern rivers nourishing this lake, implying the existence of remote polluting sources. Transect air samplings of BTEX conducted at the lake next to the bathing season of 2021 revealed airborne BTEX levels between 0.8 and 10 µg/m3, peaking up close to the bathing season, yet inconsistent with the BTEX water level trend. Lake water samples collected next to Tiberias city outfalls following the "Carmel" rainstorm showed elevated concentrations of BTEX up to 35 ppb and PAHs up to 0.47 ppb with an urban isotopic signal. The remote station's PAHs levels were less than one order of magnitude, with a distinct rural isotopic signal. Additionally, a human-specific microbial marker revealed increased sewer contributions at some of the urbansites. The results of this study show that a wide area dispersion of low atmospheric BTEX levels exists in the lake's perimeter. The dispersion rate is most likely influenced by season-based factors, e.g., motors and biomass fires. The unstudied waterborne BTEX levels in this lake are influenced by rivers, city runoff, and other yet unknown factors that may contribute to the sedimentation of these components. This process may result in a chronic pollution state. Despite the BTEX's medium-low solubility and high volatility, its under-evaluated waterborne transportation may lead to high toxic levels following bioaccumulation.

Level of BTEX in the Areas of Domestic Waste Incinerators in Northern Vietnam: A Comprehensive Assessment of Contamination, Composition and Human Health Risk.

The trend of the treatment of solid domestic waste by the domestic waste incinerator system is an option to improve waste management and to reduce the negative impacts on the environment and human health. Benzene, toluene, ethylbenzene, and xylenes (o-, m- and p-) (BTEX) are toxic chemical environmental contaminants that are released from different sources such as the domestic waste incinerator system. To determine the concentration of BTEX in the ambient air from these incinerator areas, the research team conducted four sampling campaigns in April, June, September, and November 2021, with a total of 80 samples collected. Concentrations of benzene, toluene, (m,p)-xylenes, o- xylenes and ethylbenzene ranged from 4.53 to 36.75 µg/m3, from 16.29 µg/m3 to 125.36 µg/m3, from 2.82 µg/m3 to 31.45 µg/m3, from 1.42 µg/m3 to 25.61 µg/m3, from 1.32 µg/m3 to 10.79 µg/m3, respectively. As a result of the risk assessment, it was determined that the incinerator's exhaust gas caused secondary environmental damage, impacting the health of not only workers but also people living in nearby communities. On that basis, the article recommends applying a number of management measures to minimize the negative impacts of the operation of the solid waste incinerator on the environment and the health of the workers operating the incinerator.

Adsorption Behavior of Multi-Component BTEX on the Synthesized Green Adsorbents Derived from Abelmoschus esculentus L. Waste Residue.

Benzene, toluene, ethylbenzene, and xylene (BTEX) removal is one of the most common difficulties in air pollution control. They are emitted from several processes, prejudicial to the environment and humans. BTEX leads to various environmental risks, and there is a significant need for a creating process for the complete removal of BTEX from air streams. This study's objective is the multi-component adsorption of BTEX pollutants from an air stream, by synthesizing activated carbons (ACs) under several operations. A lignocellulosic waste biomass, Abelmoschus esculentus L. (AE), was utilized as the precursor for synthesizing activated carbons (AE-ACs), and their surface chemical characteristics were investigated. Optimization processes were examined, and the change in the surface area of AE-ACs was investigated as change of some variables results like activation agent, impregnation ratio, temperature, and activation time. The maximum surface area of 968 m2/g and total pore volume of 0.51 cm3/g were attained at 1:2 impregnation ratio, activation time of 110 min, and activation temperature of 800 °C, under N2 atmosphere. A mixture of BTEX pollutants was employed to consider the effect of humidity (0.5, 1, 1.5, and 2 wt%) and initial concentrations (from 5 to 300 mg/m3), using a contact time of 120 min at the temperature of 25 °C. Under the studied conditions, the multi-component and single-component BTEX adsorption capacities by HCl-activated carbon, AE-ACH, were specifically achieved to 6.86-51.36 mg/g and 22-93.62 mg/g, respectively. Overall, Abelmoschus esculentus L. was exploited for the synthesis of AE-ACH which was successfully utilized for efficient BTEX capture from a polluted air stream.

Rapid on-site detection of underground petroleum pipeline leaks and risk assessment using portable gas chromatography-mass spectrometry and solid phase microextraction.

Locating underground pipeline leaks can be challenging due to their hidden nature and variable terrain conditions. To sample soil gas, solid-phase microextraction (SPME) was employed, and a portable gas chromatography/mass spectrometry (GC/MS) was used to detect the presence and concentrations of petroleum hydrocarbon volatile organic compounds (pH-VOCs), including benzene, toluene, ethylbenzene, and xylene (BTEX). We optimized the extraction method through benchtop studies using SPME. The appropriate fibre materials and exposure time were selected for each BTEX compound. Before applying SPME, we preconditioned the soil vapour samples by keeping the temperature at around 4 °C and using ethanol as a desorbing agent and moisture filters to minimize the impact of moisture. To conduct this optimisation, airbags were applied to condition the soil vapour samples and SPME sampling. By conditioning the samples using this method, we were able to improve analytical efficiency and accuracy while minimizing environmental impacts, resulting in more reliable research data in the field. The study employed portable GC/MS data to assess the concentration distribution of BTEX in soil vapour samples obtained from 1.5 m below the ground surface at 10 subsurface vapour monitoring locations at the leak site. After optimization, the detection limits of BTEX were almost 100 µg/m3, and the measurement repeatabilities were approximately 5% and 15% for BTEX standards in the laboratory and soil vapour samples in the field, respectively. The soil vapour samples showed a hotspot region with high BTEX concentrations, reaching 30 mg/m3, indicating a diesel return pipeline leak caused by a gasket failure in a flange. The prompt detection of the leak source was critical in minimizing environmental impact and worker safety hazards.

BTEX profile and health risk at the largest bulk port in Latin America, Paranaguá Port.

Port-related activities have a detrimental impact on the air quality both at the point of source and for considerable distances beyond. These activities include, but are not limited to, heavy cargo traffic, onboard, and at-berth emissions. Due to differences in construction, operation, location, and policies at ports, the site-specific air pollution cocktail could result in different human health risks. Thus, monitoring and evaluating such emissions are essential to predict the risk to the community. Environmental agencies often monitor key pollutants (PM2.5, PM10, NO2, SO2), but the volatile organic carbons (VOCs) most often are not, due to its analytical challenging. This study intends to fill that gap and evaluate the VOC emissions caused by activities related to the port of Paranaguá - one of the largest bulk ports in Latin America - by characterizing BTEX concentrations at the port and its surroundings. At seven different sites, passive samplers were used to measure the dispersion of BTEX concentrations throughout the port and around the city at weekly intervals from November 2018 to January 2019. The average and uncertainty of BTEX concentrations (µg m-3) were 0.60 ± 0.43, 5.58 ± 3.80, 3.30 ± 2.41, 4.66 ± 3.67, and 2.82 ± 1.95 for benzene, toluene, ethylbenzene, m- and p-xylene, and o-xylene, respectively. Relationships between toluene and benzene and health risk analysis were used to establish the potential effects of BTEX emissions on the population of the city of Paranaguá. Ratio analysis (T/B, B/T, m,p X/Et, and m,p X/B) indicate that the BTEX levels are mainly from fresh emission sources and that photochemical ageing was at minimum. The cancer risk varied across the sampling trajectory, whereas ethylbenzene represented a moderate cancer risk development for the exposed population in some of the locations. This study provided the necessary baseline data to support policymakers on how to change the circumstances of those currently at risk, putting in place a sustainable operation.

Exposure assessment of wastewater treatment plant employees to BTEX: a biological monitoring approach.

To monitor employees' work safety and exposure against air contaminants, Trans, trans-muconic acid, Hippuric acid, Methyl hippuric acid, Mandelic acid and Phenylglyoxylic acid can be used as reliable biomarkers of exposure to benzene, toluene, ethylbenzene, and xylene (BTEX) compounds. This study aims to determine the level of urinary metabolites of BTEX compounds using biological monitoring in the employees of a wastewater treatment plant (WWTP) in the south of Iran. The study was performed on 56 employees of the WWTP of one of the southern cities of Iran in 2020. Urine samples (n total = 112) consisting of 60 samples of employees working in the operation section (exposed group) and 52 samples of employees working in the administrative section (control group) in the WWTP were collected before and at the end of their shift. The mean concentration of urinary metabolites of BTEX of both groups ranged from 546.43 (µg/g cr) for trans, trans-muconic acid to 0.006 (µg/g cr) for methyl hippuric acid, which indicates that most of the evaluated metabolites showed a higher concentration than their occupational threshold limit value urine (p < 0.05). Regression analysis results showed a significant correlation (p < 0.05) between age and utilization of flame heaters with changes in the measured BTEX metabolites in the urine. The results of this study illustrate that WWTPs should be considered as one of the workplaces with potential sources of BTEX exposure for employees. Future investigations are recommended to perform itemized appraisals of BTEX intake sources, particularly in employees of the operational sections of WWTP.

[Determination of six benzene homologues in human blood by purge and trap-gas chromatography-mass spectrometry].

Objective: To establish a purge and trap-gas chromatography-mass spectrometry method based on soil analysis model for the determination of six benzene homologues (benzene, toluene, ethylbenzene, m-xylene, p-xylene and o-xylene) in human blood. Methods: From September 2020 to May 2021, diatomite was used as a dispersant to add 2.0 ml blood sample and fully mixed. The sample was directly injected into the purging and collecting bottle after purging. The gas chromatography column was used for separation. The retention time locking was used for qualitative analysis and the selected ion scanning mode (SIM) was used for detection. The detection limit and recovery rate of the method were analyzed. Results: The linear range of the method for the determination of six benzene homologues in human blood was 0.02-10.00 ng/ml, the correlation coefficient was 0.9927-0.9968, the detection limit was 0.006-0.016 ng/ml, the recovery rate of sample spiking was 84.39%-102.41%, and the precision of the method was 3.06%-6.90%. Conclusion: Purge and trap-gas chromatography-mass spectrometry can simultaneously determine the contents of six benzene homologues in human blood. The pretreatment method is simple, time-saving, and the method has low detection limit, which provides a scientific basis for the detection of benzene homologues in human body.

Evaluation of Biodegradation of BTEX in the Subsurface of a Petrochemical Site near the Yangtze River, China.

The contamination of soil and groundwater with BTEX (benzene, toluene, ethyl benzene, and xylenes) is a common issue at petrochemical sites, posing a threat to the ecosystems and human health. The goal of this study was to evaluate the biodegradation of BTEX in the subsurface of a petrochemical site near the Yangtze River, thus providing scientific basis for bioremediation of the contaminated site. Both molecular analysis of field samples and microcosm study in the laboratory were performed for the evaluation. Soil and groundwater samples were collected from the site. Microcosms were constructed with inoculum from the soil and incubated anaerobically in the presence of nitrate, ferric oxide, manganese oxide, sulfate, and sodium bicarbonate, respectively. The initial concentration of each component of BTEX (benzene, toluene, ethyl benzene, o-xylene) was 4-5 mg/L. Actinobacteria was dominant in the highly contaminated soil, while Proteobacteria was dominant in the slightly contaminated soil and the groundwater. The relative abundances of Firmicutes, Spirochaetes, and Caldiserica were higher in the highly contaminated soil and groundwater samples compared to those in the corresponding slightly contaminated samples. The relative abundances of predicted functions, such as carbohydrate transport and metabolism, nucleotide transport and metabolism, coenzyme transport and metabolism, amino acid transport and metabolism, etc., in the highly contaminated soil and groundwater samples were higher than those in the corresponding slightly contaminated samples. In microcosms, biodegradations of BTEX occurred, and the first-order rate constants in the presence of various electron acceptors had the following order: sulfate (0.08-0.10/d) > sodium bicarbonate (0.07-0.09/d) > ferric oxide (0.04-0.06/d) > nitrate (0.03-0.05/d) > manganese oxide (0.01-0.04/d).